B-21417-010 | Hytrol TA Drive Pulley for 10" OAW Conveyor

This 4" diameter drive pulley is used on the drive end of Hytrol conveyors with a TA-style end drive. It features a keyed solid shaft to transfer power from the gear box to the pulley, pulling the conveyor belt forward.

Commonly used as the main drive pulley in Hytrol’s widely-used TA model conveyors. This is one of the key components responsible for pulling the belt and is frequently replaced due to wear at the drive end.

Bearings sold separately:
This pulley is compatible with two 010.102 bearings — view product.

Image Notes:
• First image shows the pulley by itself.
• Second image shows pulley with bearings installed.

📐 Technical Specifications
• Pulley Diameter: 4"
• Shaft Diameter: 1"
• Pulley Face Length: 11-1/4"
• Overall Shaft Length: 16-5/8"
• Shaft Style: 1" keyed shaft on drive side / round shaft on opposite side
• Shaft Extension: 3-5/16" on drive side / 2-1/16" on opposite side (from pulley face)
• Installation: Mounted at the drive end of Hytrol TA-style conveyors using two 3-bolt flange bearings. The keyed shaft side is positioned under the chain guard, connecting directly to the drive sprocket and gear motor assembly. Removal typically requires taking off the sprocket and guard to free the shaft.